Parts included: • 20 x metres of misting hose • 30 x hose clamps with masonary nails • 19 x misting tees • 3 x misting elbow • 20 x brass misting nozzles • 3 x tee connector • 3 x elbow connector • 1 x misting filter • 1 x auto draining valve • 1 x misting universal tap adaptor • 1 x pipe cutter ins...
Table of contents outdoor cooling misting system 1. Outdoor cooling misting system..............P1 2. The way it works.....................................P1 3. Glossary................................................P2 4. Misting system assembly & installation....P3 a. Plan your misting installatio...
The way it works the misting system cools the air temperature by the evaporation of the fine particles of water emitted by the misting nozzles. The process of evaporation absorbs heat from the air and cools the area. The misting nozzle emits very small amounts of water. It also breaks the water into...
2 glossary misting system assembly & installation parts included: 1) 20 x metres of misting hose 7) 3 x misting elbow 2) 19 x misting tees 8) 3 x tee connector 3) 20 x brass misting nozzles 9) 1 x misting filter 4) 3 x elbow connector 10) 1 x misting universal tap adaptor 5) 1 x auto draining valve ...
3 glossary misting system assembly & installation a. Plan your misting installation take 5 minutes to work out how you will run the misting pipework and where you should position the misting jets. Also, where your water source will come from and where the supply pipeline will run. The general idea i...
Misting system assembly & installation misting system assembly & installation c. Positioning misting jets factors to consider are: - • spacing of jets. • location of jets over tables or chairs. • how many jets in a particular area. There are no fixed rules to how you position the jets. The more jets...
D. Installing the fittings the holman misting system features “compression fittings”. These fittings feature a compression ring that grips the tube and prevents it coming loose or leaking water. The higher the pressure the better the compression fittings hold onto the tube. To ensure a good joint, t...
E. Installing the misting system we recommend that each section of pipework is connected together before you attempt to pin the pipework to walls or beams. Start at the garden tap or water source point. If you are using a garden hose to bring water to the area where your misting system is, it is rec...
Work out the spacing of the misting jets and cut the misting hose to length and install the relevant misting tees. Finish each line with a misting elbow. (3 x misting elbows are included in this system to enable installation of a single or multiple line misting solution. More misting elbows are avai...
Misting system assembly & installation maintenance f. Flushing the system perhaps the most important part of the installation process is to properly flush the system. Remove all jets and then connect the water and run for 4 or 5 minutes. This will ensure that all dirt and pipe swarf is flushed from ...
Misting system assembly & installation maintenance 5. Maintenance of your misting system please use these hints to keep your misting system operational and prevent unnecessary clogging of the misting jets: - 1) drain water from your system when your system is not in use, drain all water from your sy...
Should you have any questions about this product or its operation please telephone our customer service helpline on 1300 716 188. Holman offer a 2 year replacement warranty from the original date of purchase. To claim warranty the product must be returned with a copy of the original receipt. We will...
