Holman MK21015 Instruction Manual - C. Positioning Misting Jets
Misting System Assembly & Installation
Misting System Assembly & Installation
C. Positioning Misting Jets
Factors to consider are: -
• Spacing of jets.
• Location of jets over tables or chairs.
• How many jets in a particular area.
There are no fixed rules to how you position the jets.
The more jets you have, the more water you will use and potentially the cooler
the space will become.
However, too much water can be a problem because the air can become
saturated and even wet the people and objects in the space.
Holman recommend the following:
• Space jets between 600mm and 1 metre apart.
• Locate jets away from tables and sitting areas if possible.
• Try and create a curtain of mist at least on two sides of the area being cooled.
• Install a Holman misting timer. This will allow you to regulate the amount of
water entering a space by adjusting the “ON” times and “OFF” times of the timer.
You would have more “ON” time on a hot dry day than a cooler moister day.
The HOLMAN misting timer allows you to make these settings in seconds, where
other timers may not have this feature.
4
Spacing 600mm to 1 metre for
effective coverage of chosen area
(Misting Jet)
(Misting Jet)
(Misting Tube)
2014-Misting System Deluxe Instruction Manual V2.indd 6
7/08/2014 4:36:10 PM