Holman MK21015 Instruction Manual - Glossary
3
Glossary
Misting System Assembly & Installation
A. Plan Your Misting Installation
Take 5 minutes to work out how you will run the misting pipework and where
you should position the misting jets. Also, where your water source will come
from and where the supply pipeline will run.
The general idea is to position the jets to create a “mist curtain” surrounding
your outdoor entertainment area.
It is best to position the jets away from tables and chairs and where people may
sit as the jets may at times drip water.
You do need to work out what you can attach the pipework to and plan a route
that makes attaching the pipework easy.
B. Water Supply
The misting system uses very little water volume.
The misting system works best when you have a high pressure water supply.
The higher the pressure the finer the water droplet and the quicker and more
effectively the droplet evaporates and cools the area.
A normal household water supply is usually at an adequate pressure.
You can use a garden hose to bring water from a tap in the area to the start
of the misting pipework. If the hose is running in the sun, please ensure it is a
good quality hose that will be able to withstand the pressure when the water
and hose may get heated.
Of course, the misting pipe can be connected directly to a garden tap.
HINT: If you want to easily maintain the use of the garden tap for other uses,
install a Holman 2 way or 4 way manifold and fit the misting system to one outlet.
2014-Misting System Deluxe Instruction Manual V2.indd 5
7/08/2014 4:36:10 PM