I-mate PM10A User Manual - Video Capture Mode
Pocket PC Phone User Manual
156
Pocket PC Phone User Manual
157
Video Capture Mode
To start video recording :
1. Switch to
Video Capture mode by tapping or icons, or using Left/Right
navigational pad.
2. Press the
Action button, or the Capture button on the left side of your Pocket
PC Phone.
To stop recording, press
Action or Capture button again. The first frame of the newly-
captured video file will be displayed, and Review Screen described earlier will be available.
Output format is either
Motion-JPEG AVI or MPEG4, based on the Camera Settings.
The
Camera automatically calculates
the available duration for a video
recording, based on the current
settings and the space available.
When recording in progress, it
changes to recording timer.
Camera
automatically updates the available
duration after a video taking or the
capture size changing.
The green “filmstrip” icon indicates
the camera is in idle/ready state. A
blinking red circle indicates recording
in progress.
In this example, recording has been
in progress for a duration of 21.55
seconds thus far.
Capture Sizes are:
n
L = Large (240x320)
n
M = Medium (144x176)
n
S = Small (96 x128)
The current size is large.
Exits
Camera mode
and returns to the
previous screen.
The word
Video indicates
that you are currently in
Video Capture mode.
Tap the left or right arrow
to change capture mode.
Left icon: Tap to open the
Camera Settings screen.
Right icon: Tap to switch
to
Thumbnail View of
Album mode.
The current zoom is 2x,
indicating viewing 2x of
normal size
The current
Ambience
setting is shown at this
location. This icon
indicates it has set to
Auto.
Incoming video stream
is shown using the entire
Pocket PC Phone screen.
Tap the upward-pointing/
downward-pointing triangular
icons to
Zoom In/Out.