I-mate PM10A User Manual - 2.1  Starting Up

Pocket PC Phone User Manual

18

Pocket PC Phone User Manual

19 

2.1  Starting Up

Turning Your Pocket PC Phone On and Off

To turn your device on:

Press the Power Button on the right side of the device. (The Pocket PC Phone will power 

up and, if this is the first time it has powered up, will automatically begin the initiation/

calibration process. See below for further details.)

To turn your device off:

Press the Power Button on the right side of the device.

Note: Turning your device off doesn’t turn the phone off. To turn the phone off, select the 

GSM icon and select "Turn on flight mode".

Screen tapping and calibration

When you first start up your Pocket PC, you will be asked to calibrate the screen by tapping 

the center of a cross with your stylus as it moves around the screen. This process ensures 

that when you tap the screen with your stylus, the tapped item is activated.

Re-calibrate the screen

If your Pocket PC Phone does not accurately respond to screen taps, you will need to 

re-calibrate it:

1. Tap the 

Start menu > Settings > the System tab > Screen.

2. Tap the 

Align Screen button on the General tab to re-calibrate the screen as described 

above.

Note: When aligning the touch screen, tap the target firmly and accurately.