I-mate PM10A User Manual - Infrared

Pocket PC Phone User Manual

72

Pocket PC Phone User Manual

73

4.3 Infrared and Bluetooth Connection

Infrared

You can use infrared 

(IR) to send and receive information and files between mobile devices. 

If an

 IR port is installed on your PC, you can send and receive information and files between 

your Pocket PC Phone and PC. On your Pocket PC Phone, tap the 

Start menu > Settings 

> the Connections tab > Beam.

By default your device detects incoming infrared 

(IR) and Bluetooth beams and prompts 

you to accept them. If you do not want your Pocket PC Phone to detect or receive beams, 

clear the 

Receive all incoming beams check box.

NOTE:

If someone attempts to send you an IR beam from an older device, you may not 

be prompted to accept it. In this case, before the beam is sent from the other device, tap 

Receive an infrared beam at the bottom of the Beam screen.

Bluetooth

1.  Make sure that your Pocket PC Phone is configured to receive incoming beams.

2.  Make sure that your Pocket PC Phone is turned on, discoverable, and within 10 metres 

(about 30 feet) of the other device beaming the information.

3.  When prompted to receive an incoming beam, tap 

Yes to accept the beam.

For more information about 

Bluetooth and its settings, please see Chapter 6.