I-SENS CareSens N Pop Manual - page 20
40 www.i-sens.com
www.i-sens.com 41
Setting the Post-meal Alarm (PP2 Alarm)
Step 1
Setting the PP2 Alarm On
Without inserting a test strip, press and hold
for 3 seconds to
set the post-meal alarm. "PP2", "alarm" and "On" will be displayed.
The screen will then automatically change to the memory check
mode. At this time, "alarm" indicating that the PP2 alarm has been
set will be displayed on the screen.
Step 2
Setting the PP2 Alarm OFF
To turn off the PP2 alarm, press and hold
for 3 seconds. "PP2"
and "OFF" will appear on the screen. Then the screen will change
automatically to the memory check mode without "alarm"
displayed.
The PP2 alarm goes off 2 hours after setting the alarm. The
alarms ring for 15 seconds and can be silenced by pressing
or the
button or by inserting a test strip.
"alarm" disappears
Caring for Your System
Use a soft cloth or tissue to wipe the meter exterior.
If necessary, dip the soft cloth or tissue in a small amount of
alcohol.
Do not use organic solvents such as benzene, acetone, or any
household and industrial cleaners that may cause irreparable
damage to the meter.
Caution:
•Do not expose the meter to direct sunlight, heat, or excessive
humidity.
•Do not let dirt, dust, blood, or water enter into the meter’s test
strip port.
•Do not drop the meter or submit it to strong shocks.
•Do not try to fix or alter the meter in any way.
•Strong electromagnetic radiation may interfere with the
properoperationofthisdevice.Keepthedeviceawayfrom
sources of strong electromagnetic radiation, especially when
measuring your blood glucose.
•Store all the meter components in the carrying case to
prevent loss and help keep the meter clean.