I-SENS CareSens N Pop Manual - page 9
18 www.i-sens.com
www.i-sens.com 19
Step 10
In this mode the Hypoglycemia (possible
low blood sugar) level can be selected.
The "HYPo" will be displayed with
hypoglycemia symbol .
On pressing the
button, the screen
will display the On or OFF. Press the
button when "ON" appears to set the
hypoglycemia level.
Press the
button until the correct
hypoglycemia level between 1.1 and
5.0 mmol/L is displayed. Press the
button to confirm the level.
If you do not want to set the indicator,
press the
button while the screen
displays "OFF". Then, the screen will
return to step 2. See page 13.
To confirm all settings, press and hold the
button for 3
seconds and the screen will switch off.
Turning on the Hypoglycemia (HYPo) Indicator
Caution:
Ask your healthcare professional to help you
decide what your hypoglycemia level is before setting your
hypoglycemic level.
Note:
If the test result is lower than
the pre-set hypoglycemia level, the
meter will display the following.
Setting the Strip Expiration Date Indicator
Step 1
Entering the Expiration Date Setting
Press and hold the
and
button at the
same time for 3 seconds to enter the expiration
date settings. After all segments flash across the
screen, “EP” will be displayed on the screen.
Press the
button to set the strip expiration
date.
Step 2
Setting the Year
A number indicating the year will blink.
Press the
button until the correct
year appears. Press the
button to
confirm the year and set the month.
Note:
The strip expiration date is printed on the test strip vial.
Step 3
Setting the Month
A number indicating the month will blink.
Press the
button until the correct
month appears. After finishing the setting,
press and hold the
button for 3
seconds to turn off the meter.
Note:
If the pre-set expiration date
expires, the meter will display the
following. For example, in the case when
the expiration date is set to October
of 2017, the meter displays "EP" in the
beginning of November of 2017.
2017/10