I-SENS CareSens N Voice User Manual - page 21
38 www.i-sens.com
www.i-sens.com 39
Step 1
Setting the PP2 alarm On
Without inserting a test strip,
press and hold the ▲ button
for 3 seconds to set the post-
meal alarm. PP2, the symbol
and On will be displayed. If the
talking function is on, the meter
will say "Post-meal alarm is on."
The screen will then automatically change to the memory
check mode. At this time, the symbol, indicating that the PP2
alarm has been set, will be displayed on the screen.
Step 2
Setting the PP2 alarm OFF
To turn off the PP2 alarm, press
and hold the ▲ button for 3
seconds. PP2, the symbol
and OFF will appear on the
screen. If the talking function is
on, the meter will say "Post-meal
alarm is off." Then the screen
will change automatically to the
memory check mode without symbol being displayed.
Setting the Alarm Function
Setting the Post-meal Alarm (PP2 alarm)
Four types of alarms can be set in the CareSens N Voice Meter: one
post-meal alarm (PP2 alarm) and three time set alarms (alarm 1 - 3).
The PP2 alarm goes off 2 hours after setting the alarm. The alarms
ring for 15 seconds and can be silenced by pressing ▲, ▼ or S
button or by inserting a test strip.
icon vanishes
Step 1
Without inserting a test strip, press ▲ and the S
button simultaneously for 3 seconds to enter the
time alarm mode. While OFF blinks on the screen,
alarm 1 will be displayed. If the talking function is
on, the meter will say "Set alarm one."
Step 2
On pressing ▼, alarm 1 is set and On is displayed
on the screen. Press ▼ again to cancel alarm 1.
OFF will blink on the screen.
Step 3
Press ▲ to adjust the time of alarm 1.
A number representing the time will blink on
the screen. Press ▼ to set the time. Press ▲ to
set the minute.
Setting the Time Alarms (alarm 1 - 3)