I-SENS CareSens N Voice User Manual - page 8
12 www.i-sens.com
www.i-sens.com 13
01
07 08 09 10
02
03
04
05
12
13
14
06
11
alarm:
appears when the time alarm
has been set
mem:
appears when test results
stored in the memory are displayed
ctl:
appears during the control
solution testing and when the control
solution test results are displayed
Test results:
test results are
displayed here
Blood insertion symbol:
indicates
meter is ready for the application of a
drop of blood or control solution
Temperature symbol:
appears
when the temperature is displayed
CareSens N Voice Meter Display
01
02
03
04
05
06
Post-meal test flag:
appears when post-meal testing and
when post-meal test results are displayed
Hypoglycemia symbol:
appears when the test result is
below the hypoglycemic level
Post-meal alarm symbol:
appears when the post-meal
alarm has been set
Mute symbol:
appears only when the sound is set to OFF
Battery symbol:
indicates meter batteries are running low
and need to be replaced
mg/dL, mmol/L:
unit for measuring blood glucose
Date / temperature
Time
09
10
11
12
13
14
07
08
Setting up Your System
You should check and update the meter-settings such as time
and date before using your meter or when you change the meter
batteries.
Press and hold the S button for 3 seconds to enter the SET mode.
While you are setting the meter, current settings appear on the
display. The meter will also announce each function when the
talking function is on. Press and hold ▲ or ▼ to scroll faster.
Whenever you want to complete the setting and exit from the SET
mode, press and hold the S button for 3 seconds again.
Adjusting Language, Date, Time and Sound
Step 1
Entering the SET Mode
Press and hold the S button for 3 seconds. After
all the segments flash across the screen, SET is
displayed on the screen. If the talking function
is on, the meter will say "Set meter." Press the S
button again to select a language.
Step 2
Selecting a Language
The meter has a bilingual talking
function that can be used as a verbal
aid for using the meter and hearing
test results. When you enter the
language selection mode for the first
time, L1 will be blinking and the meter
will announce "Language Selection" in
the default language English. To select
another language (L2, Spanish), press
▲
or ▼ button. Press the S button to
confirm the language and set the year.
Note:
The unit of measurement for your CareSens N Voice
Meter is preset and fixed in mg/dL.