Icare ic100 Instruction Manual - page 8
Icare ic100 tonometer manual
ENGLISH
www.icaretonometer.com
8
MENU FUNCTIONS
ScrollingbetweentheMenufunctionsstartsfromtheMEASUREdisplay,presseitheroftheNavigationbuttonslocated
aroundtheSelectbutton.
MenufunctionsareMEASURE,HISTORY,SOUND,LIGHT,LANGUAGEandINFO
MEASURE–Accesstomeasurement
Press the Select button to access.
If the probe is not loaded the LOAD display appears.
Tonometer is ready for measurement when Play-symbol display appears.
To exit, press the Select button.
HISTORY–Oldmeasurements
Press the Select button to access.
Scroll through the old values by pressing either of the Navigation buttons.
Value colors green and yellow are related to Standard deviation (SD).
To exit, press the Select button.
SOUND–SettingofTonometerbuzzer
Blue text and symbol is active setting.
Press the Select button to access.
Turn the sound ON and OFF by pressing either of the Navigation buttons.
To accept selection, press the Select button.
LIGHT–SettingofCollarindicationlight
Blue text and symbol is active setting.
Press the Select button to access.
Turn the light ON and OFF by pressing either of the Navigation buttons.
To accept selection, press the Select button.
LANGUAGE–Languagesetting
Blue text is active setting.
Press the Select button to access.
Scroll through the language options by pressing either of the Navigation buttons.
To accept selection, press the Select button.
INFO–Deviceinformation
Press the Select button to access.
Serial number (SN) of the tonometer.
Software version (SW) of the tonometer.
To exit, press the Select button
TURNING THE TONOMETER OFF
Press the Select button until the display shows the End-symbol.
If you do not use the tonometer, it will switch off automatically after 3 minutes.