Icom FR6000 Series Sales Handbook - page 18
3-1-2
UR-FR5000/UR-FR6000 Installation
UR
UR
UR
UR----FR5000/UR
FR5000/UR
FR5000/UR
FR5000/UR----FR6000 CHANNEL EXTENSION
FR6000 CHANNEL EXTENSION
FR6000 CHANNEL EXTENSION
FR6000 CHANNEL EXTENSION
MODULES
MODULES
MODULES
MODULES
SUPPLIED ACCESSORIES
SUPPLIED ACCESSORIES
SUPPLIED ACCESSORIES
SUPPLIED ACCESSORIES
1
DC power cable ....................................................1
2
Control cable ......................................................... 1
3
Angles ................................................................... 2
4
Screws (M4
×
8 mm) ............................................. 4
5
Set screws (M3
×
6 mm) ....................................... 4
6
Tapping screws (M3
×
8 mm) ...............................2
1 mm = 1/32 inch
OPENING CASE
OPENING CASE
OPENING CASE
OPENING CASE
3
Disconnect the control cable from the channel
module (original), then remove the front panel.
4
Remove 6 screws from the front panel, then remove
the shielding plate and rubber seal.
Channel module(original)
Front panel
Shielding plate
Rubber seal
18
OPENING CASE
OPENING CASE
OPENING CASE
OPENING CASE
1
Remove 7 screws from top and 2 screws each from
both sides of the repeater, then slide off the top cover to
the direction of the arrow as illustrated below.
2
Remove 3 screws from bottom and 2 screws each
from both sides of the repeater.
Rubber seal