Icom FR6000 Series Sales Handbook - page 29
4-2-2
Cloning Items
Common Setting
Common Setting
Common Setting
Common Setting
Key & Display
Key & Display
Key & Display
Key & Display
Assign one of several functions to the Dealer
assignable keys, set the beep audio frequency, Display
conditions, Select the transmit output power etc.
Set Mode
Set Mode
Set Mode
Set Mode
For setting the following items in the repeater's user
set mode to “Inhibit“ or “Enable“, and adjust the
appropriate setting.
The items includes Backlight, LCD Contrast, Fan,
Beep, SQL Level, AF Min Level, Mic Gain, Signal
Moni, System info, LCD Check, Information, and Key
Check.
Common
Common
Common
Common
Commonly set items such as Clone Comment (1)/(2),
Security, Auto Reset, TOT, Lockout, Repeater Hold
Timer, PTT Encode Tone, EPPT Delay Timer, RS-
232C, Scrambler, Low Voltage 1 and 2 value, Beat
Cancel, Wide Band Width, Front Speaker, and Digital
Function.
Memory CH
Memory CH
Memory CH
Memory CH
The 'Memory CH' window allow you to edit the channel
Cloning items
Cloning items
Cloning items
Cloning items
SCAN
SCAN
SCAN
SCAN
Scan List
Scan List
Scan List
Scan List
A total of 17 scanning lists are available for a wide
variety and flexible scanning operation.
Scan Setting
Scan Setting
Scan Setting
Scan Setting
Set the timer for Watch, Watch Unmatch, Resume,
Talk Back, Fast Scan, Slow Scan, and set the functions
such as Power ON Scan, Nuisance Delete, Mode
Dependent Scan, Monitor Key Action, Talk Back Timer
Beep.
5Tone
5Tone
5Tone
5Tone
RX Code CH
RX Code CH
RX Code CH
RX Code CH
Set RX Code, text, ABC, Aud Mode, Emer, Beep, ext.
RX Code Setting
RX Code Setting
RX Code Setting
RX Code Setting
Set Link A Timer, Compare Digit, ID Decode Timer and
Auto Timer.
TX Code CH
TX Code CH
TX Code CH
TX Code CH
Set TX Code, Text, Input Digit, Update, ABC condition,
and Sel.
TX Code Setting
TX Code Setting
TX Code Setting
TX Code Setting
Set Long Tone Timer, Link R/1/2 Timer, Lead Out
Delay Timer, ABC Decode Timer, etc.
29
The 'Memory CH' window allow you to edit the channel
information. Editable items such as RX/TX Frequency,
Time-Out-Timer, Scan List, CW ID, TX C.Tone,
Wide/Narrow, Compander, 5-Tone setting, Digital
Setting, Scrambler/Encryption OFF/ON/Inhibit etc.
Digital*
Digital*
Digital*
Digital*
Individual ID List
Individual ID List
Individual ID List
Individual ID List
Set the Individual ID within 0 to 65519, or 65535 and
Enter up to a 12-character Individual ID name.
Encryption
Encryption
Encryption
Encryption
A total of 63 encryption settings are available.
Set the Encryption Key from 0001 to 7FFF
(hexadecimal number) to each Encryption No.
ANI
ANI
ANI
ANI
Set the display condition of Talkgroup ID and Unit ID.
DTMF
DTMF
DTMF
DTMF
DTMF Encode
DTMF Encode
DTMF Encode
DTMF Encode
Program a DTMF code up to 24 digits for
acknowledgement.
DTMF Decode
DTMF Decode
DTMF Decode
DTMF Decode
Program a DTMF code up to 24 digits for DTMF decode
operation.
DTMF Setting
DTMF Setting
DTMF Setting
DTMF Setting
Set PTT Delay, No tone Timer, *# Timer, DTMF Timer,
1st Timer, ANI Display Timer, Decode with C. Tone, etc.
Continuous Tone
Continuous Tone
Continuous Tone
Continuous Tone
Set the Tone Burst, Tone Burst Timer, User CTCSS
Freq, TX DTCS Inverse and RX DTCS Inverse.
* Digital mode must be enabled for this functionality.
Delay Timer, ABC Decode Timer, etc.
Format
Format
Format
Format
Set the Tone Period for a tone encoder, Notone Timer
and Tone Length.
User Tone
User Tone
User Tone
User Tone
Set the encode tone frequency, the lower and higher
edge of the tone decode frequency range. And check
the 'Auto' check-box so that the recommended decode
frequencies are automatically set.
Multiple Table
Multiple Table
Multiple Table
Multiple Table
Enter up to 16 C.Tone and/or RAN code in each Multi
Table.
CW
CW
CW
CW
Program up to a 32-digit CW ID, Set the Interval time,
select the Standard Word, set the CW speed etc.
External I/O
External I/O
External I/O
External I/O
CH Switch Table
CH Switch Table
CH Switch Table
CH Switch Table
Assign the transceiver's memory channel to each Ext
CH No.
Port Setting of D
Port Setting of D
Port Setting of D
Port Setting of D----Sub 25 pin
Sub 25 pin
Sub 25 pin
Sub 25 pin
Assign a function to [Ext. I/O 15 to 25] and [Ext. D/A
10]
NOTE:
NOTE:
NOTE:
NOTE: The above instructions are for reference only.
Please refer to the HELP file of the cloning software
for the function or setting details.