Icom FR6000 Series Sales Handbook - page 35
Scan
Disable
Disable
Disable
Disable
The secondary channel is not used.
Prio
Prio
Prio
Prio----A CH
A CH
A CH
A CH
The priority A channel is used as the
secondary channel.
Prio
Prio
Prio
Prio----B CH
B CH
B CH
B CH
The priority B channel is used as the
secondary channel.
Start CH
Start CH
Start CH
Start CH
Scan start channel is used as the
secondary channel.
CH Number
CH Number
CH Number
CH Number
Select
Select
Select
Select
The selected channel is used as the
secondary channel.
Secondary CH
Secondary CH
Secondary CH
Secondary CH (Available when "Priority Scan" is
selected in Scan Type
Scan Type
Scan Type
Scan Type.)
Select the desired channel as a secondary channel.
The selected channel is monitored during priority scan.
The secondary channel is lower priority than the
primary channel.
Last CH
Last CH
Last CH
Last CH
Transmission is performed in the last
busy channel. If thee is no busy
channel, the scan start channel is
TX CH
TX CH
TX CH
TX CH (Available when "Normal Scan" or "Priority Scan"
is selected in Scan Type
Scan Type
Scan Type
Scan Type.)
Select the desired channel as a transmission channel.
Cancel
Cancel
Cancel
Cancel
Scan
Scan
Scan
Scan
Scan is canceled and transmission is
performed on the channel that is selected
in TX CH.
If Talk Back is turned ON and
transmission is performed within the talk
back timer time, the signal is transmitted
on the last busy channel.
Pause
Pause
Pause
Pause
Scan
Scan
Scan
Scan
Scan is paused until the signal
disappears and then resumes after the
resume timer time* has passed.
TX Action
TX Action
TX Action
TX Action (Available when "Normal Scan" or "Priority
Scan" is selected in Scan Type
Scan Type
Scan Type
Scan Type.)
Select the scan condition when transmission is
performed during scanning.
* Resume timer is set in Resume (Sec)
Resume (Sec)
Resume (Sec)
Resume (Sec) in Scan Setting
screen.
Cancel CH
Cancel CH
Cancel CH
Cancel CH (Available when "Normal Scan" or "Priority
Scan" is selected in Scan Type
Scan Type
Scan Type
Scan Type.)
Select the desired channel type that is selected when
scan is cancelled (except for transmission.)
Start CH
Start CH
Start CH
Start CH
The scan start channel is selected
automatically.
35
•
Talk back timer is set in Talk Back (Sec)
Talk Back (Sec)
Talk Back (Sec)
Talk Back (Sec) in the Scan
Setting screen.
Text
Text
Text
Text
Select the text indication capability from OFF, Text or
Start CH during scan.
channel, the scan start channel is
selected for transmission.
Prio
Prio
Prio
Prio----A CH
A CH
A CH
A CH
Transmission is performed on the
priority A channel.
Prio
Prio
Prio
Prio----B CH
B CH
B CH
B CH
Transmission is performed on the
priority B channel.
Start CH
Start CH
Start CH
Start CH
Transmission is performed on the
scan start channel.
CH Number
CH Number
CH Number
CH Number
Select
Select
Select
Select
Transmission is performed on the
selected channel.
Talk Back
Talk Back
Talk Back
Talk Back (Available when "Normal Scan" or "Priority
Scan" is selected in Scan Type
Scan Type
Scan Type
Scan Type.)
Select the talk back function ON or OFF.
If "Last CH" is selected in TX CH
TX CH
TX CH
TX CH, this function is not
available.
ON
ON
ON
ON
When transmission is performed within the
talk back timer time* (after the resume timer
has passed), the signal is transmitted on the
last busy channel.
OFF
OFF
OFF
OFF
Even if transmission is performed within the
talk back timer time* (after the resume timer
has passed), the signal is transmitted on the
channel that is selected in TX CH.
automatically.
Start
Start
Start
Start
CH/Talk
CH/Talk
CH/Talk
CH/Talk
Back
Back
Back
Back
The scan start channel is selected
automatically when scan is canceled during
scanning.
The last busy channel is selected
automatically when scan is canceled while
receiving a signal, or during scanning within
the talk back timer time (after the resume
timer has passed).
TX CH
TX CH
TX CH
TX CH
The channel that is selected in TX CH is
selected automatically.
TX CH/Talk
TX CH/Talk
TX CH/Talk
TX CH/Talk
Back
Back
Back
Back
The channel that is selected in TX CH is
selected automatically when scan is
canceled during scanning.
The last busy channel is selected
automatically when scan is canceled while
receiving a signal, or during scanning within
the talk back timer time (after the resume
timer has passed).
OFF
OFF
OFF
OFF
The text indication is turned OFF.
Text
Text
Text
Text
The text indication is turned ON. The
channel's text that is programmed in
Display Text
Display Text
Display Text
Display Text as above is indicated during
scan.
Start
Start
Start
Start
CH
CH
CH
CH
The text indication is turned ON. The scan
start channel's text is indicated during scan.