Icom FR6000 Series Sales Handbook - page 22
4-1-1
Functions Programmable
to Assignable Keys
•
Null
Null
Null
Null
No function.
•
CH Up/Down
CH Up/Down
CH Up/Down
CH Up/Down
Push to select a channel after selecting a specific
function via other keys.
•
Scan A Start/Stop
Scan A Start/Stop
Scan A Start/Stop
Scan A Start/Stop
- This key operation depends on Power ON Scan
setting in the Common screen.
When Power ON scan function is turned "OFF";
When Power ON scan function is turned "OFF";
When Power ON scan function is turned "OFF";
When Power ON scan function is turned "OFF";
Push to start and cancel scanning operation.
When Power ON scan function is turned "ON";
When Power ON scan function is turned "ON";
When Power ON scan function is turned "ON";
When Power ON scan function is turned "ON";
Push to pause scanning, then resumes scanning after
passing the time period specified in Auto Reset Timer
Auto Reset Timer
Auto Reset Timer
Auto Reset Timer.
- Push and hold this key for 1 sec. to indicate the scan
group, then push [CH Up] or [CH Down] to select the
desired group.
•
Scan B Start/Stop
Scan B Start/Stop
Scan B Start/Stop
Scan B Start/Stop
- Push to start and cancel scanning operation. Scan
resumes after passing the time period specified in
Auto Reset Timer
Auto Reset Timer when scan is canceled except for
•
Null
Null
Null
Null
No function.
•
CH Up/Down
CH Up/Down
CH Up/Down
CH Up/Down
Rotate to select a channel after selecting a specific
function via other keys.[DIAL].
•
SQL Level Up/Down
SQL Level Up/Down
SQL Level Up/Down
SQL Level Up/Down Rotate to select SQL level.
For [P0]/[P1]/[P2]/[P3]
For [P0]/[P1]/[P2]/[P3]
For [P0]/[P1]/[P2]/[P3]
For [P0]/[P1]/[P2]/[P3] and [P4]
P4]
P4]
P4]
Key Assign
Key Assign
Key Assign
Key Assign
Assign a function to each programmable key;
[Dial]/[P0]/[P1]/[P2]/[P3]
[Dial]/[P0]/[P1]/[P2]/[P3]
[Dial]/[P0]/[P1]/[P2]/[P3]
[Dial]/[P0]/[P1]/[P2]/[P3] and [P4].
P4].
P4].
P4].
The functions you can assign to [DIAL] are limited.
For [Dial]
For [Dial]
For [Dial]
For [Dial]
22
resumes after passing the time period specified in
Auto Reset Timer
Auto Reset Timer
Auto Reset Timer
Auto Reset Timer when scan is canceled except for
this key.
- Push and hold this key for 1 sec. to indicate the scan
group, then push [CH Up] or [CH Down] to select the
desired group.
•
Scan Add/Del (Tag)
Scan Add/Del (Tag)
Scan Add/Del (Tag)
Scan Add/Del (Tag)
- The channel can be added or deleted to/from the
selected scanning list.
1. Push to indicate the scan list, then push [CH Up] or
[CH Down] to select the desired list.
2. Push to add or delete the channel to/from the
selected scanning list.
3. Push and hold for 1 sec. to exit the scan list
selection mode.
- Push this key while scan is paused (a signal is
detected) on a channel (except for primary or
secondary channel), the channel is cleared from the
scan list.
When Nuisance Delete
Nuisance Delete
Nuisance Delete
Nuisance Delete is turned "ON" in Scan Setting
screen, the cleared channel is added to the scan list
again after the scan is canceled.
•
Prio
Prio
Prio
Prio A,
A,
A,
A, Prio
Prio
Prio
Prio B
B
B
B
Push to select priority A/B channel programmed in Atr
Atr
Atr
Atr
in the Memory CH screen respectively.