Icom FR6000 Series Sales Handbook - page 34
4-6
Scan
.
Scan List
Scan List
Scan List
Scan List
A total of 16 scanning lists are available for a wide
variety and flexible scanning operation. In this screen,
program scanning condition for each list.
Display Text
Display Text
Display Text
Display Text
Enter up to a 12-character text to indicate message,
etc. and/or indicating the scan list during scanning.
Scan Type
Scan Type
Scan Type
Scan Type
Set the scanning type to each scan list. Scan OFF,
Normal Scan and Priority Scan are available.
The watch time period, the power ON scan function
etc. is programmed in Scan Setting screen.
Scan OFF:
Scan OFF:
Scan OFF:
Scan OFF:
Scanning operation is turned OFF.
Normal Scan:
Normal Scan:
Normal Scan:
Normal Scan:
Normal scan. Scans all selected channels. The scan
proceeds in sequence.
When "Secondary CH" is set:
When "Secondary CH" is set:
When "Secondary CH" is set:
When "Secondary CH" is set:
− When a signal is detected on a channel other than
"Primary CH" or "Secondary CH," scan pauses until the
signal disappears and "Primary CH" and "Secondary
CH" are continuously monitored alternately.
Scan moves and pauses on "Primary CH" or "Secondary
CH" if the signal is detected on it.
− When a signal is detected on "Secondary CH," scan
pauses until the signal disappears and "Primary CH" is
continuously monitored.
Scan moves and pauses on "Primary CH" if the signal is
detected on it.
* "Prio A" means "Primary CH," and "Prio B" means
34
Priority Scan:
Priority Scan:
Priority Scan:
Priority Scan:
Priority scan. "Primary CH" and "Secondary CH" are
used as the priority channel.
The selected channels are scanned in sequence while
monitoring "Primary CH" and "Secondary CH.“
When scan is paused on "Primary CH," other channels
are not monitored.
* "Prio A" means "Primary CH," and "Prio B" means
"Secondary CH."
When "Secondary CH" is not set:
When "Secondary CH" is not set:
When "Secondary CH" is not set:
When "Secondary CH" is not set:
▒ NOTE:
NOTE:
NOTE:
NOTE: The scanning channels are selected in Scan
Scan
Scan
Scan
▒ List
List
List
List in in the Memory CH screen.
The compatibility of the previous and current scan mode
The compatibility of the previous and current scan mode
The compatibility of the previous and current scan mode
The compatibility of the previous and current scan mode
When a signal is detected on a channel other than
"Primary CH," scan pauses until the signal disappears
and "Primary CH" is continuously monitored.
Scan moves and pauses on "Primary CH," if the signal
is detected on.
Primary CH
Primary CH
Primary CH
Primary CH (Available when "Priority Scan" is selected
in Scan Type
Scan Type
Scan Type
Scan Type.)
Select the desired channel as a primary channel. The
selected channel is monitored during priority scan.
Prio
Prio
Prio
Prio----A CH
A CH
A CH
A CH
The priority A channel is used as the
primary channel.
Prio
Prio
Prio
Prio----B CH
B CH
B CH
B CH
The priority B channel is used as the
primary channel.
Start CH
Start CH
Start CH
Start CH
Scan start channel is used as the
primary channel.
CH Number
CH Number
CH Number
CH Number
Select
Select
Select
Select
The selected channel is used as the
primary channel.