Icom VE-PG2 Installation Manual - page 2
+
See “Installation guide w” for bridge and selective call mode setting examples.
Network and System default settings
Network setting
IP address
192.168.0.1*
ubnet mask
255.255.255.0*
ystem setting
Administrator ID
admin Fixed
Administrator
password
wavemaster*
To set the VE-PG2 to the default setting, see Precautions
Precautions
Precautions
for details.
*User settable.
4. Connection
Connect the Ethernet cable, HUB, the ground cable and AC adapter to the VE-PG2 by following steps q to r as shown
below.
Connect the AC adapter with the VE-PG2 after connecting the Ethernet cable.
• Disconnect the HUB from the established network before connecting the Ethernet cable, only if the VE-PG2 is in the default
mode.
• The VE-PG2 can be connected directly to the PC using the DI-X crossover type Ethernet cable.
et the static PC IP address example: 192.168.0.100
ee the instruction manual which comes with the PC for
details on setting the PC IP address.
When you set the static VE-PG2 IP address, assign the IP
address by network administrator.
MODE
DC
LAN
TRX1
TRX2
TRX3
IN
+
+
+
OUT
SW
ABC
Connect the Ethernet cable
Start up the PC
Connect the AC adapter
to an AC outlet
Make sure the LEDs are lit.
To any unused
HUB port
HUB
To the VE-PG2 [LAN] port
To the DC jack
Supplied AC adapter
VE-PG2
A Ethernet cable (purchase separately)
PC IP address
(example: 192.168.0.100)
1
2
3
4
5
q
e
After turning the power ON, make sure [POWER], [LAN]
and [VoIP] are lit.
The LEDs light as a default or after resetting the VE-PG2.
w
r
POWER
VoIP
TRX1
TRX2
TRX3
LAN
EXT
CAUTION:
Connect the Ethernet cable to ONLY the
[LAN] port. If it is connected to [TRX1],
[TRX2] or [TRX3] port, the VE-PG2 and
HUB may be damaged.
GROUND
R WARNING!
To prevent electrical shock, television interference TVI , broadcast interference BCI and other problems, ground the
VE-PG2 through the ground terminal.
For best results, connect a heavy gauge wire or strap to a ground terminal of an AC outlet or a long ground rod. ake
the distance between the ground terminal and ground as short as possible.
NEVER connect the ground terminal to a gas or electric pipe. This may result in an electrical shock or cause a fire.
Click LAN IP in the Network setting to display the
LAN IP in the Network setting to display the
LAN IP in the Network setting to display the
in the Network setting to display the
in the Network setting to display the
Network setting to display the
Network setting to display the
to display the
to display the
LAN IP setting screen.
LAN IP setting screen.
setting screen.
setting screen.
1
5. Accessing the VE-PG2 setting screen
6. VE-PG2 IP address setting
Accessing the VE-PG2 setting screen
The following procedure describes how to access the
VE-PG2 setting screen from a web browser on the PC.
http://192.168.0.1/
Enter
Open a web browser, and then enter the VE-PG2 IP
address in the address bar.
1
Push [Enter]. The login authentication window will
open.
2
Enter admin default user name and wavemaster
default password in their respective input field, and
then click [OK] to display the VE-PG2 setting screen.
3
The factory default IP address setting is shown as an
example.
S
etting screen descriptions
ee the instruction manual PDF file: Download from the
Icom web site for details of the setting screen.
About web browsers
Only icrosoft Internet Explorer 8 or later should be used
with the VE-PG2.
Activate the Java cript and set to allow Cookies on your
web browser to display the setting screen correctly.
If other browsers are used, the screen may not be
displayed correctly.
q
w
e
r
q
Enter
w
Click
q
Link to Icom web site
Click the Icom logo to link to
the Icom web site if your PC
is connected to the Internet.
w
Selects the setting
screen
Displays the screen name
list on a menu line. When
y o u p l a c e t h e m o u s e
pointer on each menu title,
a list of items drops down
which you can use to select
the desire setting.
Example: Place the mouse
pointer on Connection set-
Connection set-
Connection set-
ting , and then click Oper-
, and then click Oper-
, and then click Oper-
Oper-
Oper-
ating mode shown on the
shown on the
list.
.
e
Setting items and
value display
Displays the setting and
values when you click the
screen name example:
Clicking Operating mode
Operating mode
Operating mode
displays the setting screen .
r
Setting buttons
ave o r c a n c e l s e t t i n g
values.
If The setting which should
The setting which should
be rebooted was changed.
is displayed on the screen
when you click the [ ave]
button, click the [ ave and
Reboot] button.
The VE-PG2 reboots, and
the setting items and values
are updated.
The following message is
displayed on the screen
while the VE-PG2 is reboot-
ing.
• The setting screen does
not automatically return,
s o c l i ck [ B a ck ] a b o u t
3 0 s e c o n d s a f t e r t h e
VE-PG2 is rebooting
VE-PG2 is rebooting
message appears.
2
Select
2
et the IP address and subnet mask of the VE-PG2.
Be sure not to input the same IP address as another
device’s address.
When you update the firmware online, connect the
VE-PG2 to the Internet and set the default gateway
and DN server addresses as the addresses used
in the network.
When finished, click [ ave and Reboot].
Setting the PC IP address
q
Enter
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
A-6838W-2U
Printed in Japan
© 2010 Icom Inc.
w
Click
VE-PG2 is rebooting.
Click [Back] after VE-PG2 has re-
booted.
icrosoft, Windows and Windows Vista are registered trademarks of icrosoft Corporation in the United tates and/or other countries.
All other products or brands are registered trademarks or trademarks of their respective holders.
This product includes in GoAhead Web erver software of GoAhead oftware Inc.
© 2002 GoAhead oftware, Inc. All Rights Reserved.