1. DL manuals
  2. ICON Health & Fitness
  3. Treadmill
  4. PROFORM PERFORMANCE 750
  5. User Manual

ICON Health & Fitness PROFORM PERFORMANCE 750 User Manual

Summary of PROFORM PERFORMANCE 750

  • Page 1

    User’’s manual caution read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Model no. Petl80913.0 serial no. Write the serial number in the space above for reference. Serial number decal www.Iconeurope.Com customer service united ...

  • Page 2: Warning Decal Placement

    2 proform is a registered trademark of icon ip, inc. Warning decal placement this drawing shows the locations of the warning decals. If a decal is missing or illegible, call the telephone number on the front cover of this manual and request a free replacement decal. Apply the decal in the location s...

  • Page 3: Warning:

    3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Before beginning any exercise program, consult your physician. This is especially important for persons over age 35 or persons with pre-existing health pr...

  • Page 4: Danger:

    4 21. Do not attempt to move the treadmill until it is properly assembled. (see assembly on page 7, and how to fold and move the treadmill on page 21.) you must be able to safely lift 45 lbs. (20 kg) to move the treadmill. 22. When folding or moving the treadmill, make sure that the storage latch is...

  • Page 5: Before You Begin

    5 thank you for selecting the new proform ® performance 750 treadmill. The performance 750 treadmill provides an impressive selection of fea- tures designed to make your workouts at home more effective and enjoyable. For your benefit, read this manual carefully before you use the treadmill. If you h...

  • Page 6: Part Identification Chart

    6 part identification chart use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the part list near the end of this manual. The number following the key number is the quantity used for assembly. Note: if ...

  • Page 7: Assembly

    7 assembly •• assembly requires two persons. •• place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you  nish all assembly steps. •• after shipping, there may be an oily substance on the exterior of the treadmill. This is normal. If ther...

  • Page 8

    8 3. Identify the left upright (78). Have a second person hold the left upright near the base (86). See the inset drawing. Tie the wire tie in the left upright (78) securely around the end of the upright wire (77). Then, insert the upright wire into the lower end of the left upright as you pull the ...

  • Page 9

    9 5. Identify the left handrail (74). Remove the tie from the 5/16" cage nut (34). If necessary, press the cage nut back into place. Hold the left handrail (74) near the left upright (78). Insert the upright wire (77) through the bracket on the bottom of the left handrail. Then, pull the upright wir...

  • Page 10

    10 8. With the help of a second person, hold the con- sole assembly near the left upright (78). Insert the end of the upright wire (77) through the looped plastic tie. Connect the upright wire (77) to the console wire. See the inset drawing. The connectors should slide together easily and snap into ...

  • Page 11

    11 9. Set the console assembly on the left handrail (74) and the right handrail (75). Be careful not to pinch any wires. Pull the plastic tie tight around the upright wire (77) and cut off the end of the tie. Insert the excess upright wire into the left handrail. Attach the console assembly with six...

  • Page 12

    12 13. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the  oor or carpet, place a mat under the treadmill. Note: extra parts may be included. Keep the included hex key in a secure p...

  • Page 13: Danger:

    13 how to plug in the power cord this product must be earthed. If it should malfunc- tion or break down, earthing provides a path of least resistance for electric current to reduce the risk of electric shock. This product’’s power cord has an equipment-earthing conductor and an earthing plug. Import...

  • Page 14

    14 features of the console the treadmill console offers a selection of features designed to make your workouts more effective and enjoyable. When you use the manual mode, you can change the speed and incline of the treadmill with the touch of a button. As you exercise, the console will dis- play ins...

  • Page 15

    15 how to turn on the power important: if the treadmill has been exposed to cold temperatures, allow it to warm to room tem- perature before you turn on the power. If you do not do this, you may damage the console displays or other electrical components. Plug in the power cord (see page 13). Next, l...

  • Page 16

    16 4. Change the incline of the treadmill as desired. To change the incline of the treadmill, press the incline increase or decrease button or one of the incline buttons numbered 0 through 10. Each time you press one of the buttons, the treadmill will gradually adjust to the selected incline setting...

  • Page 17

    17 when you are  nished using the treadmill, press the power switch into the off position and unplug the power cord. Important: if you do not do this, the treadmill’’s electrical components may wear prematurely. How to use an onboard workout 1. Insert the key into the console. See how to turn on th...

  • Page 18

    18 5. Measure your heart rate if desired. See step 6 on page 16. 6. When you are finished exercising, remove the key from the console. See step 7 on page 16. How to use an ifit workout note: to use an ifit workout, you must have an optional ifit module. To purchase an ifit module at any time, go to ...

  • Page 19

    19 8. When you are finished exercising, remove the key from the console. See step 7 on page 16. For more information about the ifit mode, go to www.Ifit.Com. How to use a set-a-goal workout 1. Insert the key into the console. See how to turn on the power on page 15. 2. Select a set-a-goal workout. T...

  • Page 20

    20 the information mode the console features an information mode that keeps track of treadmill information and allows you to person- alize console settings. 1. Select the information mode. To select the information mode, hold down the stop button while inserting the key into the console, and then re...

  • Page 21

    21 how to fold the treadmill to avoid damaging the treadmill, adjust the incline to the 0% position before you fold the treadmill. Then, remove the key and unplug the power cord. Caution: you must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 1. Hold the metal frame ...

  • Page 22: Troubleshooting

    22 most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assis- tance is needed, see the front cover of this manual. Symptom: the power does not turn on a. Make sure that the power cord is plugged into a prop...

  • Page 23

    23 lower the treadmill (see how to lower the treadmill for use on page 21). Remove the three #8 x 3/4" screws (1). Carefully slide the motor hood (59) off. Locate the reed switch (44) and the magnet (49) on the left side of the pulley (45). Turn the pulley until the magnet is aligned with the reed s...

  • Page 24

    24 symptom: the walking belt is not centered between the foot rails. Important: if the walking belt rubs against the foot rails, the walking belt may be damaged. A. First, remove the key and unplug the power cord. If the walking belt has shifted to the left, use the hex key to turn the left idler ro...

  • Page 25: Exercise Guidelines

    25 exercise guidelines these guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember, proper nutrition and adequate rest are essential for successful results. Exercise intensity whether your goal is to bur...

  • Page 26: Part List

    26 key no. Qty. Description key no. Qty. Description 1 32 #8 x 3/4" screw 2 4 #8 x 3/4" silver screw 3 6 5/16" x 1" bolt 4 4 1/4" x 1/2" screw 5 1 m8 x 45mm bolt 6 1 m8 x 50mm bolt 7 6 3/8" star washer 8 4 1/4" star washer 9 6 5/16" star washer 10 2 3/8" nut 11 6 3/8" x 3 1/2" screw 12 2 1/4" idler ...

  • Page 27

    27 key no. Qty. Description key no. Qty. Description 97 1 #8 nut 98 1 #8 x 3/4" bolt 99 2 m8 nut 100 2 1/4" x 1 3/4" screw * –– user’’s manual note: specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual. *these parts ...

  • Page 28: Exploded Drawing A

    28 12 58 20 14 55 41 43 28 33 16 42 21 48 54 29 23 23 53 22 52 14 23 51 16 50 44 49 22 43 28 33 40 16 19 42 16 16 36 35 19 16 20 16 33 48 47 39 38 46 18 45 19 16 35 16 16 16 33 16 57 16 37 12 97 19 19 19 98 5 100 56 99 99 6 100 70 exploded drawing a model no. Petl80913.0 r0513a.

  • Page 29: Exploded Drawing B

    29 72 1 67 1 1 1 1 31 68 71 69 73 1 31 1 17 64 32 1 31 66 29 23 65 29 25 23 63 30 32 17 30 62 61 32 32 61 1 1 60 59 1 exploded drawing b model no. Petl80913.0 r0513a.

  • Page 30: Exploded Drawing C

    30 11 7 26 85 27 27 85 84 82 11 7 26 82 11 7 27 85 84 83 24 13 81 13 81 79 9 9 3 34 4 8 2 75 76 8 2 80 1 34 74 4 3 3 76 78 9 3 9 77 27 85 81 81 87 10 87 86 10 1 1 1 1 1 exploded drawing c model no. Petl80913.0 r0513a.

  • Page 31: Exploded Drawing D

    31 95 96 94 15 93 15 93 1 1 1 92 24 91 88 89 90 1 1 1 1 1 1 1 1 1 exploded drawing d model no. Petl80913.0 r0513a.

  • Page 32: Recycling Information

    Part no. 344653 r0513a printed in china © 2013 icon ip, inc. This electronic product must not be disposed of in municipal waste. To preserve the environment, this product must be recycled after its useful life as required by law. Please use recycling facilities that are authorized to collect this ty...