ICON Health & Fitness PROFORM PERFORMANCE 750 User Manual - page 20
20
THE INFORMATION MODE
The console features an information mode that keeps
track of treadmill information and allows you to person-
alize console settings.
1. Select the information mode.
To select the information mode, hold down the
Stop button while inserting the key into the console,
and then release the Stop button. When the infor-
mation mode is selected, the following information
will be shown:
The Time/Pulse display
will show the total
number of hours the
treadmill has been
used.
The Distance/Speed
display will show the
total number of kilo-
meters or miles that
the walking belt has
moved.
2. Select the optional screens
While the information
mode is selected, press
the decrease button next
to the Enter button to
select each of the follow-
ing screens in the center
display:
UNITS: To change the unit of measurement, press
the Enter button. To view distance in miles, select
ENGLISH. To view distance in kilometers, select
METRIC.
DEMO MODE: The console features a display
demo mode, designed to be used if the treadmill
is displayed in a store. While the demo mode is
turned on, the console will function normally when
you plug in the power cord, press the power switch
into the reset position, and insert the key into the
console. However, when you remove the key, the
displays will remain lit, although the buttons will not
function. If the demo mode is turned on, the word
ON will appear in the center display. To turn on or
turn off the demo mode, press the Enter button or
the Speed decrease button.
CONTRAST LVL: Press the Incline increase and
decrease buttons to adjust the contrast level of the
displays. Then, press the Enter button.
If an iFit module is connected to the console, you
may also select the following screens:
MODULE: If an iFit module is connected, the dis-
play will show the word WIFI.
AUDIO COACH: To turn on or turn off the audio
coach, press the Enter button.
START MODE: The start mode will appear when
you insert the key into the console or when you
press the Home button. Press the Enter button
repeatedly to select the manual mode or the iFit
mode as the start mode.
CHECK WIFI: Press the Enter button. The center
display will show the software version number,
the network SSID, the network encryption type,
the wireless signal strength, the IP address of the
module, the number of registered users and their
names, the results of the DNS lookup, the status of
the iFit server, and whether the check passed.
SEND/OBTAIN DATA: To send and receive work-
outs, workout logs, and updates, press the Enter
button. When the process is nished, the words
TRANSFERS DONE will appear in the display.
3. Exit the information mode.
To exit the information mode, remove the key from
the console.