Jablotron 100 User Manual - page 14
13
a
The event history is not available
a
The system doesn’t send event notifi cations (SMS, email, push messages)
a
Virtual system keypads are not available
a
A detector’s photo gallery and photos upon request are not available
a
Thermometers, electricity meters and other supported automation devices are not displayed
A password will be sent to the user’s e-mail address, which also serves as a login name.
The password can be changed at any time in the settings.
Once logged into the account, the system shows all active devices that can be monitored or controlled,
depending on the registered version of MyJABLOTRON (PROFI or LITE).
2.6 OPERATING THE SYSTEM USING
THE MYJABLOTRON SMARTPHONE APP
If the user account is created in the MyJABLOTRON web interface
(see previous chapter), the alarm system can be monitored and controlled
remotely using MyJABLOTRON app for smart phones running either on Android
(ver. 4.0.3 or higher), iPhone (ver. 7 or higher) or Windows Mobile. The application
can be downloaded free of charge after logging into MyJABLOTRON,
or from Google Play, AppStore, etc.
Login credentials for MyJABLOTRON smart phone app are identical to those
for the MyJABLOTRON web interface.
2.7 OPERATING THE SYSTEM BY SMS
SMS commands can control Individual sections and programmable outputs just
like keypad segment buttons. The form of text message to operate the system is:
CODE_COMMAND. The actual commands are predefi ned (SET/UNSET) with
an additional numeric parameter which identifi es a specifi c section.
One SMS can control multiple sections at the same time. In this case,
added numbers in the command defi ne sections.
Example of an SMS command used to set sections 2 and 4 and user code 2222
2222_ SET_2_4
The commands to control the programmable outputs can be programmed
by a system installer. For example, you may choose SHUTTERS DOWN as your command to close
the shutters on your windows. It is also possible to confi gure the system not to require a code before
a command. In such case the command is simply automatically identifi ed when the system recognizes
the user’s phone number from which the SMS was sent. Confi guration is done by a service technician.
2.8 OPERATING THE SYSTEM REMOTELY
USING A COMPUTER (J-LINK)
The JABLOTRON 100 system can be operated both remotely and locally on-site
(see chapter 2.3) by installing the J-Link software on your computer which can also
manage users (change codes, cards/tags, and phone numbers).
To operate the system remotely, the program must be downloaded from the
“Downloads” section of the www.jablotron.com website or it can be found in the
control panel’s SD card. The registration code of the security system (a 14 digit
code) and the telephone number of its SIM card is required to connect
to the system remotely the fi rst time. Remote access is initiated by clicking
on “Internet“ in the main menu.
2. OPERATING THE JABLOTRON 100 SYSTEM