Jacuzzi SOAKER BATH SERIES Installation And Operation Instructions Manual - page 13
Soaker™ Bath Series
Installation and Operation
www.jacuzzi.com
Page 13
English
Cleanup
To avoid dulling and scratching the surface of the bathtub, never use abrasive cleaners. For most soiled surfaces, a
mildliquiddetergentandwarmwaterissufficient.Thefollowingisalsorecommended:
•
Remove spilled plaster with a wood or plastic edge. Spots left by plaster or grout can be removed if lightly rubbed
with detergent on a damp cloth or sponge. Do not use metal scrapers, wire brushes or other metal tools, as they
will damage the bathtub’s surface.
•
Paint,tar,orotherdifficultstainscanberemovedwithFantastik®orsoapywater.
•
Minorscratcheswhichdonotpenetratethecolorfinishcanberemovedbylightlysandingwith600-gritwet/dry
sandpaper.Youcanrestoretheglossyfinishtotheacrylicsurfaceofthebathtubwithaspecialcompound,
Meguiar’s #10 Mirror Glaze. If that is not available, use automotive rubbing compound followed by an application
of automotive paste wax.
•
Majorscratchesandgougeswhichpenetratetheacrylicsurfacewillrequirerefinishing.CallJacuzziLuxuryBath
tofindaserviceagentinyourarea.
Chromatherapy (Light) Operation
Press light button 1st time:
Turns colored lighting ON, use up and down buttons to start
color scroll or select alternate color.
Press light button 2nd time:
Turns white lighting ON, use up and down buttons to select
intensity of white light.
Press light button 3rd time:
Turns all lighting OFF
Colored Lighting Operation
The colored lighting default is constant blue. Pressing the (UP) arrow button activates color scroll in this order: blue,
teal, green, yellow, orange, red, pink, purple and then returns to blue and continuously repeats. To stop on a selected
color, press the (UP) arrow button again. Pressing the (DOWN) arrow button activates color scroll in this order: blue,
purple, pink, red, orange, yellow, green, teal and then returns to blue and continuously repeats. To stop on a selected
color, press the (DOWN) arrow button again.
White Lighting Operation
Therearefivewhitelightintensities.Pressthe(+)buttontoincreaselightintensity.Pressthe(-)buttontodecrease
light intensity. If chromatherapy fails to work:
- reset the GFCI
- ensure the plug is fully in the outlet
- ensure the connectors to the control panel and control box are fully engaged in receptacles
- contact Jacuzzi Luxury Bath if the above does not resolve the issue
Operation
AllbathtubsmanufacturedbyJacuzziLuxuryBatharedesignedfor“fillanddrain,”whichmeansthebathtubshouldbe
drainedaftereachuseandfilledwithfreshwaterbythenextbather.Thisisahealthprecaution,asthesebathtubsare
not designed to hold water continuously like pools or spas.
‘UP’ Arrow
‘DOWN’ Arrow
Light
Maintenance
Cleaning the Bathtub
Surface Repair
To clean your bathtub, simply use a mild, nonabrasive liquid detergent solution. You can protect and restore the gloss
toadulledacrylicsurfacebyapplyingMeguiar’s#10MirrorGlaze,aproductspecificallydesignedforuseonacrylic
finishes.IfMeguiar’sisnotavailable,useafinegradeautomotiverubbingcompoundfollowedbyanapplicationof
automotive paste wax.
Never use abrasive household cleaners on any Jacuzzi Luxury Bath product.
Minorscratcheswhichdonotpenetratethecolorfinishcanberemovedbylightlysandingwith600-gritwet/dry
sandpaper. Restore the gloss using Meguiar’s Mirror Glaze or automotive paste wax. Major scratches and gouges
whichpenetratetheacrylicsurfacewillrequirerefinishing.CallJacuzziLuxuryBathtofindaserviceagentinyourarea.