Jandy AquaLink RS Owner's Manual - page 7
6
Using the Menu
How to set automatic on and off times:
1. Press the MENU button. Use the FORWARD and BACK buttons
to advance to the PROGRAMMenu and press ENTER. The
AquaLink RS display will read SELECT EQUIPMENT TO
PROGRAM.
2. Press the button of the equipment you want to program
(e.g., FILTER PUMP).
3. You are now in a menu of choices. You may choose ON ALL
DAYS, ON WEEKDAYS, ON WEEKENDS, or you may choose
a specific day of the week. Use the FORWARD and BACK
arrow keys to move to the choice you want, then press ENTER.
4. The display now reads ON HR 1 PM <- ->*. Use the
FORWARD and BACK arrow keys to move to the hour that you
want the equipment to turn on, and press ENTER when that
hour is displayed.
5. Repeat this process to set the ON MINUTE, OFF HOUR, and
OFF MINUTE. When you are finished, the AquaLink RS Display
will review a summary of your program(s).
Note on multiple programs: You can have many on and off times
for a piece of equipment. If you have more than one program (i.e.,
more than one on and off time) for a piece of equipment, when you
enter a second program, the AquaLink RS display will read 1
PROGRAM TIME ALREADY EXISTS. If more than one program
time already exists, the AquaLink RS will display how many
program times exist. To review these programs, use the REVIEW
Menu (see below). If you set two overlapping program times for a
piece of equipment (e.g., the off time for the first program is later
than the on time for the second program), the equipment will turn
on at the first on time, and turn off at the first off time.
How to review items:
1.
Press the MENU button. Use the FORWARD and BACK buttons
to move to the
REVIEWMenu and press ENTER. The AquaLink
RS display will read PROGRAMS <- ->* .
2.
Advance through the list of items to review. Choose
PROGRAMS if you want to review programming, TEMP SET if
you want to review the temperature settings for the pool and
spa, SPA SWITCH if you want to review what the buttons on
the Spa Side Switch or Spa Link control and whether it is
enabled or not, FRZ PROTECT if you want to review which
equipment is freeze protected, AUX LABELS if you want to see
the label associated with each piece of auxiliary equipment,
DIMMERS if you want to review which buttons control dimmable
lights, or JVA ASSIGNS if you want to review which buttons
control JVAs. Press ENTERwhen the option you want is
displayed.
3.
After you press ENTER, the AquaLink RS display will show a
review of the item you selected.
About the Program Menu:
The PROGRAM Menu lets you program on and off times for any
equipment controlled by the AquaLink RS. You can program
equipment to turn on or off at any time you want, including all
days, weekends, weekdays, or any specific day of the week. You
choose the specific on and off hour and minute. You can program
each piece of equipment for multiple on/off times each day.
About the Review Menu:
The REVIEW Menu lets you review programming, temperature
settings for pool and spa water, Spa Side Switch settings, freeze
protection settings for equipment, auxiliary equipment labels,
which auxiliaries control dimmable lights, and JVA assignments.