Jandy JXi 200 Installation And Operation Manual - Warning
Page 39
ENGLISH
Jandy
®
Pro Series, JXi
™
Gas-Fired Pool & Spa Heater
|
Installation & Operation Manual
Section 11. Professional Service and Maintenance
Call a qualified service technician to perform all service
and repairs on the heater. To locate a licensed or qualified
technician or independent service company in your area,
contact Zodiac Technical Support at:
1-800-822-7933
www.jandy.com
Before servicing the heater:
•
Confirm that the heater control is set to either POOL
or SPA
•
Confirm the temperature set point for either Pool or
Spa is set high enough to make the heater operate
given the current water temperature.
WARNING
SERVICING SAFETY
Service procedures can be hazardous because they involve fuel
gas, electricity, moving parts and procedures which require testing
or temporary bypass of safety controls. For this reason, the heater
mustbeservicedonlybyaqualifiedprofessionalservicetechnician.
IMPROPER SERVICE HAZARD
The heater incorporates unique design features. Incorrect service
of this heater can result in personal injury or damage to property. To
avoidsuchhazards,theheatermustbeservicedonlybyaqualified
professional service technician.
Section 12. Spare Parts
Using genuine Zodiac factory replacement parts helps to
ensure the ongoing quality and reliability of our products.
Unauthentic parts might seem okay on the surface,
but they often fall short of factory standards, and they
typically lack the backing you get from an established,
global manufacturer like Zodiac. Plus, the use of
unauthentic parts voids all factory warranties.
Zodiac does not sell parts directly to pool owners, so
when it’s time for maintenance, please see your local
Preferred Professional Provider (PPP) of genuine parts.
You can find a PPP at www.zodiacpoolsystems.com/
parts.
NOTE: To identify the correct part, you will need to know the
model number, serial number and type of gas when applicable. This
information can be found on the rating plate sticker, which is located
inside the heater on the outside of the combustion chamber.
12.1 Major Components
Cabinet
See Section 11.3
Electrical System
See Section 11.6
Heat System
See Section 11.4
Water System*
See Section 11.5