K9Safety K9Caller Operator's Manual - page 10
Remote Settings
Page 10
Setting Keychain Remote Time
The LCD display is equipped with a 12-hour clock that in addition to displaying the time,
offers an alarm clock function as well as a remote activation timer.
To set the time:
1. Press and hold Buttons 2 and 3 for three seconds.
· The remote will beep two times and three bars will be shown indicating time set mode is
entered.
2. Press and release Button 2 until the correct hour is displayed. (hold button to scroll).
3. Press and release Button 3 until the desired minute is displayed. (hold button to scroll).
4. When the desired time is displayed, press Button 5 to store.
· The remote will beep 3 times to indicate the time has been set.
Setting Keychain Remote Alarm Clock
The alarm clock function can be set to play an alert melody at a specific time of day.
To set the alarm clock function:
1. Press and hold Buttons 2 and 3 until the remote beeps three times.
· The alarm clock bell and three bars will be shown indicating alarm clock set mode is en-
tered.
2. Press Button 2 until the desired hour is displayed.
3. Press Button 3 until the desired minute is displayed. The button may be held down to
scroll faster.
4. When the desired time is displayed, press Button 5 to store.
· The remote will beep 3 times to indicate the alarm clock has been set.
To disable the alarm clock function:
1. Press and hold Buttons 2 and 3 until the remote beeps three times.
· The alarm clock bell and three bars will be shown indicating alarm clock set mode is en-
tered.
2. Press Button 1 to disable the alarm clock.
The remote will beep 3 times and show OFF to indicate the alarm clock has been disabled.
Setting The Call (Hot Alert) Temperature
To change the Call temperature:
1. Press and hold Buttons 2 and 3 until the remote beeps five times.
· C ° will be shown indicating call temperature set mode is entered.
2. Press Button 2 to increase the temperature. The button may be held down to scroll faster.
3. Press Button 3 to decrease the temperature. The button may be held down to scroll faster.
4. When the desired temperature is displayed, press Button 1 to store the value.
The remote will display the temperature and beep 3 times then 4 times to indicate the set
temperature.
*Note this function is not available when remote lockout is selected.
Setting The Hot Start Temperature
To change the Hot Start temperature:
1. Press and hold Buttons 2 and 3 until the remote beeps six times.
· h ° will be shown indicating automatic hot start temperature set mode is entered.
2. Press Button 2 to increase the temperature. The button may be held down to scroll faster.
3. Press Button 3 to decrease the temperature. The button may be held down to scroll faster.
4. When the desired temperature is displayed, press Button 1 to store the value.
The remote will display the set temperature and beep 3 times then 4 times to indicate the set
temperature.
*Note this function is not available when remote lockout is selected.