K9Safety K9Caller Operator's Manual - page 11
K9 Features Described
The K9 functions operate independently of the alarm functions even though they share a
common remote control. The K9 functions can be activated while the alarm functions are
disarmed and vies-versa. The K9 functions and alarm functions can also be activated and
armed at the same time. The K9 functions can be broken down into the following features;
Engine control, Temperature Alert, and Door Pop.
Auto Start Engine Control Enabled (See Programming Branch 7 in the installers guide)
With auto start enabled the system will start the vehicle
’s engine whenever the following
conditions are present.
The vehicle must be in park in order to activate the K9 functions
K9 functions are activated (control switch LED is solid)
The temperature is at or above the Hot Start Temperature Setting (Default 75)
With auto start disabled the system will trigger the engine to automatically run whenever the
vehicle arrives. Pressing the brake pedal again will shut down the engine run.
The system will send a Call and sound the hot temperature alert when the K9 functions are
activated and the temperature is at or above the Call temperature. Typically the alert will
cause only the horn to honk, but this feature is also programmable.
In addition, if the system is set to passive K9 feature (Default) the system will automatically
activated every time the vehicle transmission is shifter into park and the brake pedal is re-
leased. It will further keep the vehicle
’s engine running if the temperature is above the Hot
Start setting and will automatically delay the alert if the temperature is at or above the Call
(Hot Alert) setting for 5-10 minutes. (Default 5 Min, See Branch 5)
Page 11