Kampmann KaCool D 1 Installation And Operating Instructions Manual - page 41
41
KaCool D
02.02.2017
Installation and Connection
Control overview
AC fans, infra-red remote control
Installation: Infra-red receiver
The infra-red receiver and transmitter are located in a separate
cardboard box. Fix the receiver to the casing as shown on the
illustration opposite. A recess is provided on one side of the
casing for mounting. Once the casing is mounted and fi xed to
the cassette, the plug of the receiver can be connected to the
PCB.
Infra-red transmitter/remote control
The enclosed batteries (2x AAA 1.5 V) must be inserted into the
back of the remote control before it can be used.
Observe the special requirements for disposal of batteries once
they have been used.
The maximum range of the remote control to the receiver is
approx. 3 m.
The transmitter must be pointed directly at the receiver to
enable communication. Surrounding furnishings, such as lamps,
can signifi cantly affect the transmission capacity.