KanexPro HDSC51HDBT User Manual - page 13
Compact Scaler Switcher (with PoE)
9
3.5 Applications
The compact scaler switcher is useful for many applications, such as boardrooms, live
monitoring, conference rooms, home theater set ups, instructional technology,
command & control centers, smart homes, and much more.
4. System Operations
4.1 Operations of Buttons
The buttons can be used for adjusting the output resolution of the scaler switcher as well
as switching operations, software update procedures, and volume adjustment plus
navigating the menus.
4.1.1 Adjusting the Resolution
Supports auto-adjustment and manual-adjustment. Press and hold the RESO/AUTO
button for 7 seconds or more to enter auto-adjustment/manual-adjustment mode.
Notice:
1. In auto-adjustment mode, the scaler will choose the resolution of the display device.
If you need to manually choose the resolution of the HDMI display device:
¶
Cut off the power of scaler and break the connection between scaler and
HDBASE70R receiver.
¶
Turn on the power of HDSC51HDBT
¶
Get the resolution of local HDMI output device.
¶
Connect HDBASE70R to HDSC51HDBT.
2. In auto-switching mode, front panel button control is not available, but IR and RS232
control is able to switch modes.
Switching Operations
Supports auto-switching and manual-switching. Press and hold the SOURCE/AUTO
button for 7 seconds or more to enter in auto-switching/manual-switching mode.
The display will show the following: