KanexPro HDSC51HDBT User Manual - page 38
Compact Scaler Switcher (with PoE)
8. Safety Operation Guide
In order to guarantee the reliable operation of the equipment and your own safety,
please abide by the following procedures for installation and maintenance:
1) The system must be grounded properly. Please do not use two blade plugs. The
alternating power supply ranges from 100v to 240v and from 50Hz to 60Hz.
2) Do not put the device in a place of too hot or too cold.
3) As the unit generates heat when running, the unit should be kept an cool
environment as overheating may damage the unit permanently.
4) Turn off the general power switch in humid weather or if the unit is left unused for
along period of time.
5) Before operation, ensure that the alternating current wire is pull out of the power
supply:
l
Take off or reship any components of the equipment.
l
Take off or rejoin any pin or other link of the equipment.
6) DO NOT repair it on your own. Send the unit to your dealer for all internal repairs.
7) DO NOT splash, spray, spill, or use any chemical substance or liquid in or around
the unit.