KanexPro HDSC51HDBT User Manual - page 20
Manual is about: Compact Scaler Switcher w/ HDBaseT & HDMI output
of
41
Compact Scaler Switcher (with PoE)
16
The interface of the control software is showed as below:
Please set the parameters of COM number, bound rate, data bit, stop bit and the parity
bit correctly, and then you are able to send command in Command Sending Area.
4.4.3 RS232 Communication Commands
Communication protocol: RS232 Communication Protocol
Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none
Command
Function
Feedback Example
Switch Commands
50701%
Switch to HDMI 1 input
Switch to HDMI 1
50702%
Switch to HDMI 2 input
Switch to HDMI 2
Parameter Configuration area
Monitoring area indicates if the
command sent works.
Command Sending area