KanexPro HDSC51HDBT User Manual - page 30
Compact Scaler Switcher (with PoE)
26
Output Adjust: Adjust output image position (X: horizontal direction and Y: vertical
direction) and ratio aspect (width and height).
Input4 Select: Select the video source format for VGA input, includes AV 1 (C-video
signal), VGA 1 (VGA signal) and YPbPr 1 (Component video signal). Use the ENTER
button to select the desired source format.
Input5 Select: Select the video source for VGA input, includes AV 2 (C-video signal),
VGA 2 (VGA signal) and YPbPr 2 (Component video signal). Use the ENTER button to
select the desired source format.
For INPUT4 & INPUT5, when format signal has changed:
1. Firstly, select a format through this menu (the signal format changed while the video
source is still the same).
2. Secondly, switch off the present signal channel (e.g. switch to another channel).
3. Thirdly, switch to channel INPUT4/INPUT5 again.
HDMI1 Audio Select: switch between Embedded and Line to choose the desired audio
output port for HDMI1.
HDMI2 Audio Select: switch between Embedded and Line to choose the desired audio
output port for HDMI2.