KanexPro HDSC51HDBT User Manual - page 34
Compact Scaler Switcher (with PoE)
30
2. Via RS232 commands
Send command 50681% (or 50684%) to switch to YPbPr1 (or YPbPr2) source.
3. Via IR remote & OSD
Press the MENU button on the IR remote to enter in OSD, and then enter the
OPTION menu: set “INPUT 4 Select” to YPbPr1, and “INPUT 5 Select” to
YPbPr2. After setting, press INPUT 4 (or INPUT 5) button to switch to YPbPr1
(or YPbPr2) source.
B. Connecting the VGA converting cable like this:
l
Connect with Composite Video (C-VIDEO) Source
A. Operation Examples:
1. Via front panel buttons & OSD
Press the MENU button on the front panel to enter in OSD, and then enter the
OPTION menu: set “INPUT 4 Select” to AV1, and “INPUT 5 Select” to AV2. After
setting, press SOURCE/AUTO button on the front panel to switch to AV1 or AV2
source.
2. Via RS232 commands
Send command 50682% (or 50685%) to switch to YPbPr1 (or YPbPr2) source.
3. Via IR remote & OSD
Press the MENU button on the IR remote to enter in OSD, and then enter the
OPTION setting menu: set “INPUT 4 Select” to AV1, and “INPUT 5 Select” to
AV2. After setting, press INPUT 4 (or INPUT 5) button to switch to AV1 (or AV2)
source.
B. Connecting the VGA converting cable like this: