Kanrich 915 User Manual - page 8
+
915Mi 4" Handsfree video monitor
TFT screen
adjustment
Code setting button/
Indicator(system in use)
video dummy
Door Release 2
Door Release 1/
Resident Code setting button
/ Door Status Indicator
ringing tone
adjustment
Handsfree Talking /
Monitoring
Buttons/Indicators
Resident Code setting button
When doorphone system is standby and press " + ", you will hear "Du" on monitor
and on camera ,too. Please enter "monitor code" on camera immediately , monitor will get
this call and send "Ding-Dong" , it means a successful code setting .
"in use" indicator
The red LED constantly on, it means one of residents is using this doorphone system,
please wait this resident finishing talking then to use it .If you find this indicator is flashing
in operation ,please press " " twice , let system return to "standby" status .
Door Release 2
When monitor screen is started , press " " for opening another door lock of another door.
Door Release 1/Code setting button
Press for opening door lock of door no. 1 .
Door Status Indicator
The red LED constantly on , it means the door no.1 is open, the red LED lights off ,it means
the door is close .
Handsfree Talking
Press for getting a call and talking , press one more time for off line.
The talking time limitation is 180 sec. If after talking , the resident forgot to press for
finishing talking, the system will be off line automatically 180 sec. later .
Monitoring
Press to start monitor screen and monitor door camera situation and also to talk with
camera , press one more time for finish.
TFT screen adjustment
Up : TFT screen adjustment buttons---CONTRAST / BRIGHTNESS / COLOR / RESET / EXIT
Middle : adjustment
Down : adjustment
+
-
-
P18
2011 Sep.