KEB 00F6P00-1000 Instructions For Use Manual - 2 Product Description
2 Product Description
The unit series F6 is a series of single axis frequency inverters. These devices are
equipped with a diagnostic interface (description see F6 control boards). The F6 opera-
tors can be connected to this interface.
These operators can perform the following tasks:
• Providing a user surface (keyboard and display)
• Providing a diagnostic interface (USB or Ethernet)
The operators can not perform the following tasks:
• Providingofinterfacesforpermanentinstallation(fieldbuses/IO/etc.)
2.1 Specified Application
The COMBIVERT serves exclusively for the control and regulation of three-phase mo-
tors. It is intended for the installation into electrical systems or machines.
Technical data and information for connection conditions shall be taken from the type
plate and from the instruction manual and must be strictly observed.
The used semiconductors and components of the KEB Automation KG are developed
and dimensioned for the use in industrial products.
RESTRICTION
If the product is used in machines, which work under exceptional conditions or if essen-
tialfunctions,life-supportingmeasuresoranextraordinarysafetystepmustbefulfilled,
the necessary reliability and security must be ensured by the machine builder.
2.1.1 Residual risks
Despite intended use, the drive converter can reach unexpected operating conditions in
case of error, with wrong parameterization, by faulty wiring or non-professional interven-
tions and repairs. This can be:
• Wrong direction of rotation
• Motor speed too high
• Motor is running into limitation
• Motor can be under voltage even in standstill
• Automatic start
2.2 Unintended use
The operation of other electric consumers is prohibited and can lead to the destruction of
the unit. The operation of our products outside the indicated limit values of the technical
data leads to the loss of any liability claims.
10
PRODUcT DEScRIPTION