KEB 00F6P00-1000 Instructions For Use Manual - page 17
5.2 Initial start-up
5.2.1 Switching on
After switching on the operator searches automatically for the connected inverter, also
in case of communication failure to the inverter. The actual checked node address is
displayed on the bottom line in the start image and main menu. This node number can
also be read in the operator parameter OS13.
When accessing via the Ethernet or USB interface, the used node address is optionally,
i.e. the operator responds to all node addresses.
Theoperatorrequiresthefollowingfilesinitsflashmemoryforcorrectoperation:
File
Feature
language_f6.dat
Contains the operator texts for the operator in all languages.
paras.blb
Contains the parameter descriptions of all F6 operators as well as some F6 invert-
er types.
xxxxx.blb
Files to install additional inverter types. Can be read out directly from some invert-
ers.
Table 2:
Operator files
The Ftp mode see „5.11 FTP mode“ and the PC program KEB FTP is used to install
thesefiles.Eachfilecanbeprotectedwithanaccesslevelsee„5.10Fileadministration“.
Inverter parameters
Operator parameters
Parameter backup
Up/Download
Work list
File administration
FTP mode
Start test mode
Themainmenuistheuppermostmenulevel.Withthekeys▲
and▼youcanselectthedesiredsubmenu.PressENTERto
jump to the selected submenu.
Inverter parameters
Figure 7:
Main menu
17
OPERATION