KEB 00F6P00-1000 Instructions For Use Manual - page 15
Manual is about: Single axis frequency inverter
of
34
4.2 Diagnostic interfaces
4.2.1 Ethernet interface
1
8
Figure 4:
RJ45 interface
The Ethernet interface emulates the diagnostic interface on the F6 device. DIN66019II
is used as protocol via TCP or UDP on port 8000 and KebFtp on port 8002. Additionally
it can be accessed to parameters / objects of the operator. The operator responds to all
node addresses.
4.2.2 USb interface
Figure 5:
USB interface
The USB interface emulates the diagnostic interface on the F6 device. DIN66019II is
used as protocol serial with any baud rate. Additionally it can be accessed to param-
eters / objects of the operator. The USB interface is electrically isolated.The operator
responds to all node addresses.
15
INTERFAcES