KEB 00F6P00-1000 Instructions For Use Manual - page 32
5.11 FTP mode
Inverter parameters
Operator parameters
Parameter backup
Up/Download
Work list
File administration
FTP mode
Start test mode
ENTER opens the submenu for the FTP mode.
The FTP mode is used to transfer files from/in the flash file
system via the KebFTP protocol. For the Ethernet operator the
FTP mode is always available via UDP port 8002. For the USB
operator the USB interface is changed in this mode for KebFTP
operation and does not longer respond to DIN66019II requests.
The used baud rate is freely selectable for USB.
Figure 19: FTP mode
5.12 Function test of keyboard and display
Inverter parameters
Operator parameters
Parameter backup
Up/Download
Work list
File administration
FTP mode
Start test mode
ENTER starts a test mode, to check the function of the single
keys and the LC-display.
Follow the instructions on the display during the test run.
Figure 20: Function test of keyboard and display
32
OPERATION