KEB 00F6P00-1000 Instructions For Use Manual - page 22
Manual is about: Single axis frequency inverter
of
34
5.5 Inverter parameters
Inverter parameters
Operator parameters
Parameter backup
Up/Download
Work list
File administration
FTP mode
Start test mode
The inverter parameters include all parameters available in the
power unit. They are function-related divided into groups. They
are displayed on the operator via the internal bus.
The description of the inverter parameters can be taken
from the programming manual F6.
For the display of the inverter parameters, the operator requires
theappropriateconfigurationfile,whichmustbestoredas*.blb
fileintheflash.
Alternatively, a similar type can be manually selected from
paras.blb.
See chapter „5.2.1 Switching on“.
Figure 12: Operator parameters
22
OPERATION