KEB COMBIVERT F6 Instructions For Use Manual - page 41
Other manuals for COMBIVERT F6:
Instructions For Use Manual, Instructions For Use Manual, Instructions For Use Manual, Instruction manual
of
80
Procedures:
3. Push the drive converter slowly past the front vertical frame rails to the stopper of
the opened locking levers into the control cabinet.
4. Close the locking levers by pressing them down.
5. Remove the lifting device.
6. Push the drive converter to the end point.
7. Fix the rear wall of the drive converter at 8 points with M8 x 20 mm screws on the
rear horizontal mounting rails.
The specifications of company Rittal must be observed when screwing.
F
KEB
Aut
oma
tion K
G
32683 Bar
ntrup
Mad
e in
Ger
man
y
F
KEB A
utom
ation K
G
326
83 Bar
ntrup
Mad
e in G
erman
y
Figure 18: Fix the drive converter housing V in the control cabinet
41
MecHANIcAL INSTALLATION