Kedacom IPC411 User Manual - page 12
High Speed Dome Camera
User Manual
8
8
Note: If the target object is moving fast, this method is not applicable.
On Page 2 of function buttons, click
to enable WDR and
to disable WDR.
Enable Backlight
Backlight compensation can realize optimal exposure of target object under extremely strong
light. But it may make the bright zone grow white.
On Page 2 of function buttons, click
to enable Backlight and
to disable Backlight.
3.1.2.4
White Balance
3.1.2.5
Day/Night Mode
3.1.2.6
Noise Reduction
3.1.2.7
Auto Adjustment
3.1.2.8
Video Freeze
Click
(Manual) on Page 2 of function buttons to select shutter speed, measured in
second (s).
Enable WDR
WDR can provide optimal exposure in intense backlight conditions.
The basic conception of White Balance is “to make all colors white regardless of the color
temperature of the light source”. It can compensate color rendition in pictures taken in specific
light source.
On Page 2 of function buttons, select White Balance Mode, Auto, Light or Manual.
After selecting Manual, enter Red Gain and Blue Gain respectively to adjust image colors.
Day (Night) Mode means disabling (enabling) IR lamp (only some models support), and the image
shifts to color (B/W), thus to get optimal images for day (sufficient light source) and night
(insufficient light source) conditions.
■ On Page 1 of function buttons, click
(Day Mode) and the image shifts to color.
Click
(Night Mode) to and the image shifts to B/W.
Click
(Auto) and the system will shift Day/Night Mode automatically according to
pre-set value.
■ Open Parameter>Video Parameter>Camera Mode, set time duration and enable Night
Mode.
The camera will shift to night mode in the preset time duration.
Note: User can set other parameters under Night Mode, such as Shutter Priority, Aperture Priority,
Brightness, Contrast, Saturation and Sharpness.
When there are many noise points caused by environment and camera lens, Noise Reduction
function can be enabled to adjust images.
On Page 6 of function buttons, select Noise Reduction mode,
or
(manual).
Manual mode includes 15 levels.
Click
to disable this function.
Auto Adjustment applies default settings of the camera block, which are suitable for most
conditions.
On Page 1 of function buttons, click
(All auto adjustments), and all parameters will
restore to default values.
On Page 5 of function buttons, select this function and the video will display the last frame
image before clicking. Click
to disable freeze.