Kedacom IPC411 User Manual - page 15
High Speed Dome Camera
User Manual
11
11
Picture 3-7 Parameter>PTZ Function>Preset Setting
Patrol Position: serial number of patrol position, cannot be modified.
Preset Position No.: can be modified. Click Preset Position No. to modify. User can select a preset position
randomly from 255 positions, and preset position cannot be selected repeatedly.
Stay Time: can be modified. Click Stay Time to set stay time for each preset position, time range 5 to1800 seconds.
Default stay time is 10 seconds.
Enable/Disable:
“Yes” means the preset position has been set already; “No” means the preset position has not been
set. When camera patrols to the unset preset position, it will skip directly and go to the next preset position.
Auto Guard Tour: Run operations of Load Preset/ Preset Patrol/Pan Patrol/Tilt Patrol/Frame Patrol/ Random Patrol/
Pano Patrol/ Variety Patrol automatically.Open Parameter>PTZ Function> Guard Tour, checkEnable Auto Guard
Tour,and select operation from the drop-down list.
Picture 3-8 PTZ Function> Guard Tour>Enable Auto Guard Tour
Load Preset:After stop operating on camera for a certain period of time, the lens will return to the defined preset
position automatically. The time duration is configurable, and default value is 3 minutes.
Preset Patrol: After stop operating on camera for a certain period of time, the lens will enable Preset Position Patrol
automatically. The time duration is configurable, and default value is 1 minute.
Tilt Patrol: When Auto Reverse is enabled, camera will patrol vertically from -5° to 185°; otherwise, camera patrols
vertically from -5° to 90°.
Pan Patrol: Camera patrols horizontally from 0° to 360°.
Frame Patrol: In every key frame interval, camera automatically rotates horizontally by 90°.
Random Patrol: Camera automatically patrols horizontally at random.
Pano Patrol: Camera patrols panoramically from 0° to 180° in vertical direction and from 0° to 360° in horizontal
direction.
Variety Patrol: Camera patrols automatically in a variety of paths. Details can be referred to in Variety Patrol.
Manual Patrol: Camera patrols among 32 preset positions successively, and the process of the patrol is Manual
Patrol. Currently, Path 1 includes No. 1 to No. 32 preset positions, and Path 2 includes No. 33 to No. 64 preset
positions. The rest is in the same manner.
On Page 5 of function buttons, select path number and click
to enable Manual Patrol.