Kuschall Compact Service Manual - Service Manual
10
© Küschall AG, Schweiz | 2011-07
Service Manual
Seat
Replacing the seat cover
Difficulty:
Tool:
ß
10
1
Loosen bolts and remove plug .
2
Remove seat cover including plastic rods.
Position new seat cover. Adjust seat cover to width SB + 25 mm.
Retighten bolts and plug .
Turning the seat locking mechanism
If the seat edge can be too easily removed from the seat locking mecha-
nisms, either the front two or all four seat locking mechanisms can be
rotated by 180°:
Difficulty:
Tool:
Ã
3
Loosen bolt in seat locking mechanism.
Turn seat locking mechanism by 180°.
Secure bolt with adhesive (low-strength).
Retighten the bolt.
i
Screw out the bolt only to the extent that the seat locking mechanism
can be turned as otherwise the threaded insert can move and is then
difficult to re-position.)
1
2
1
à 4 Nm
à 4 Nm