Kuschall Compact Service Manual - Service Manual
21
© Küschall AG, Schweiz | 2011-07
Service Manual
Sideparts
Sideparts
Clothes guard/mudguard
Fitting the clothes guard/mudguard
Difficulty:
Tool:
Ã
3
8
1
Fit side fastenings onto the frame.
2
Fit clothes guard/mudguard with bolts and nuts onto the side
fastenings (4 Nm).
j
CAUTION!
Fit the mudguard such that it is positioned either 25 mm
above the tyres, to avoid the risk of trapping one’s fingers.
Adjusting the clothes guard/mudguard
Difficulty:
Tool:
Ã
3
8
1
Loosen bolts . Move the clothes guard/mudguard .
Retighten bolts .
or
2
Loosen and remove bolts .
3
Re-fit clothes guard/mudguard in another position (4 Nm).
Fitting and adjusting the removable mudguard
Difficulty:
Tool:
Ã
3, 4, 5
10
1
Fit side fastening element with bolts
a
and
b
.
2
Insert mudguard in the side fastening element . Adjust the height
by loosening the three bolts on the end stop .
3
If the edge of the mudguard does not run evenly over the tyre, loosen
bolts / and push the mudguard into the required position.
Retighten bolts /.
j
CAUTION!
Fit the mudguard such that it is positioned either 25 mm
above the tyres, to avoid the risk of trapping one’s fingers.
11
1
2
1
1
2
3
5
6
1
2a
4
2b
à 4 Nm
a
à 4 Nm
b
à 7 Nm
à 7 Nm
à 7 Nm