Kuschall Compact Service Manual - Service Manual
11
© Küschall AG, Schweiz | 2011-07
Service Manual
Backrest
Backrest
Backrest height
The backrest height can be changed by fitting the telescopic tubes into
another position in the backrest tubes. If this setting option is insufficient,
the telescopic tubes can be replaced.
Adjusting the height of standard backrests
Difficulty:
Tool:
Ã
3, 4, 6
8, 10
Push the backrest cover upwards and remove the bolt on both
sides.
Push the push handles upwards or downwards until you reach the
required height. Replace the bolt and tighten.
i
If this setting range is insufficient, use new push handle tubes.
i
If the backrest height was changed considerably, a new backrest
cover may have to be fitted.
Adjusting the height of Velcro® adjustable backrests
Difficulty:
Tool:
Ã
3, 4, 6
8, 10
Remove backrest cover and move the Velcro® bands until bolt is
visible.
Remove bolt and move the push handle tube to the required height.
Insert bolt into the appropriate hole and tighten.
i
If the backrest height is changed considerably, the push handles must
be replaced. An additional Velcro® band may have to be fitted or one
may have to be removed.
1
2
3
4
1
2
3