Kuschall Compact Service Manual - Service Manual
27
© Küschall AG, Schweiz | 2011-07
Service Manual
Front wheels
Setting the steering error angle
Difficulty:
Tool:
Ã
5
10
Loosen bolts and nuts .
Hold spirit level against the clevis pin housing .
Turn the bolt until the clevis pin housing is vertical.
Retighten bolts and nuts .
j
CAUTION!
It is important that the settings on the left and right are precisely the
same.
Correcting the trail angle
Difficulty:
Tool:
Ã
5
10
Loosen bolts and nuts .
Remove clevis pin housing .
Attach adjustment template / (for toe-out: insert template at the
bottom , for toe-in: insert template at the top ).
Fit clevis pin housing .
Set the angle,
Chap. Front wheels; ‹Setting the steering error angle›,
‹Correcting the trail angle›.
Special housing guides
Fitting special housing guide for smaller SHv (housing guide,
fitted high)
Difficulty:
Tool:
Ã
5
10
Remove clevis pin housing .
Remove standard housing guide.
Attach bolt .
Fit special housing guide ‹high›.
Fit clevis pin housing .
Set the angle,
Chap. Front wheels; ‹Setting the steering error angle›,
‹Correcting the trail angle›.
Fitting special housing guide for larger SHv
(housing guide, fitted low)
Difficulty:
Tool:
Ã
5
10
Remove clevis pin housing .
Remove standard housing guide.
Fit special housing guide ‹low›.
Fit clevis pin housing .
Set the angle,
Chap. Front wheels; ‹Setting the steering error angle›,
‹Correcting the trail angle›.
1
2
3
90˚
4
1
3
1
1
4
2
2
5
5
1
2
3
1
2
à 13 Nm
à 13 Nm
à 13 Nm
à 13 Nm
à 13 Nm
à 13 Nm
à 13 Nm
à 13 Nm