LaCie 12big Rack Fibre 8 Quick Install Manual

Manual is about: User Manual

Summary of 12big Rack Fibre 8

  • Page 1

    Lacie 12big rack network table of contents quick install guide page 1 table of contents 1. Introduction ............................................................................................................. 2 1.1 safety ............................................................................

  • Page 2: Introduction

    Lacie 12big rack network introduction quick install guide page 2 introduction 1. Safety 1.1. All plug-in modules and blank plates are part of the fire enclosure and must only be removed when a replacement can be immediately added. The system must not be run without all units in place. In order to co...

  • Page 3: Esd Precautions

    Lacie 12big rack network introduction/installation quick install guide page 3 •the rack when configured with the units must meet the safety requirements of ul 60950-1 and iec 60950-1. Warning: bifurcated power cords must not be used with the 12big rack network. Esd precautions 1.3. It is recommended...

  • Page 4: Replacing A Fan

    Lacie 12big rack network installation quick install guide page 4 figure 2: removing a psu replacing a fan 2.4. Warning: the cover must only be opened by service personnel. Release the enclosure top cover by turning the lock 1. Mechanism to the ‘unlocked’ position and slide the cover back until it st...

  • Page 5: Battery Safety

    Lacie 12big rack network installation quick install guide page 5 battery safety 2.5. Replacing batteries on the motherboard. Please refer to the battery replacement procedure in the 12big rack network user guide supplied with your system. Warning: there is a danger of explosion if the battery is rep...

  • Page 6: Creating A Raid Array

    Lacie 12big rack network installation quick install guide page 6 creating a raid array 3. And setting up sharing start up and log in 3.1. Connect a monitor, mouse, and keyboard to the 1. 12big network and boot the system. Follow the steps in the set up windows wizard, then 2. Log on as an administra...

  • Page 7: Mount The Array

    Lacie 12big rack network installation quick install guide page 7 mount the array 3.3. From the start menu, select 1. Server manager. B. Next, choose a raid type (lacie recommends raid6 for best protection and raid5 for the best protection/cost-per-tb ratio). C. Next, type a name for the array (examp...

  • Page 8: 3.4. Share The Volume

    Lacie 12big rack network installation quick install guide page 8 click 6. Next. Click 7. Next. Click 8. Next. Click 9. Next. You may choose to select quick format. Click 10. Finish. Wait for quick format to finish. When completed, 11. Below the disk capacity will be printed healthy (primary partitio...

  • Page 9

    Lacie 12big rack network installation quick install guide page 9 set ntfs permissions and click 5. Next. Type a name for the smb and nfs share and click 6. Next. Enter a description (optional) and click 7. Next. Set smb permissions and click 8. Next. Set nfs permissions. 9. Click 10. Next. Click 11....