LaCie 12big Rack Fibre 8 Quick Install Manual - Mount The Array
LaCie 12big rack network
Installation
Quick Install Guide
page 7
Mount the array
3.3.
From the Start Menu, select
1.
Server Manager.
b. Next, choose a RAID type (LaCie recommends
RAID6 for best protection and RAID5 for the best
protection/cost-per-TB ratio).
c. Next, type a name for the array (example: NAS
RAID 6 Array).
d. Next, choose a stripe (LaCie recommends 64K).
e. If you don’t have a backup battery, uncheck the
Write Cache button.
f. Click the OK button. The new array is now
available and will be listed under Unit Maintenance.
g. The RAID protected disk array is now set up. You can
close the window or keep it open for further reference.
Expand the Storage listing, then click on
2.
Disk
Management.
The
3.
Initialize Disk window should appear. If not,
right-click the row titled Disk 1 and select Initialize Disk.
Select
4.
GPT if your volume is greater than 2TB
(GUID Partition Table) and click OK.
The
5.
New Simple Volume wizard should appear.
If not, right-click the row titled Disk1 and select New
simple volume.