Lampo HYPERCOLOR 575 User Manual - page 11
10
FREQUENCY
It is recommended to clean the projector every two months to ensure efficiency and performances. If the projector
is used in particularly smoky or dusty areas, clean the projector more frequently.
1. Use a (soft) compressor to remove the dust from the front areas and from the fan (keeping the fan blocked with
i.e. a screwdriver)
2. Use a vacuum cleaner to remove dust.
3. Use a soft cloth (non-fabric) and pH neutral (pH7) liquid detergent to clean front glass and the other surfaces.
Make sure you remove all residual traces.
4. Make sure the cleaning procedure did not damage any internal part or modified their correct position.
5. Make sure no cleaning materials or tools remain inside the projector.
LIFE SPAN AND DISPOSAL
If the projector is operated in ordinary working conditions and the user follows the planned maintenance operations
established by the Manufacturer, it should last for three years. When the projector is discarded, it must be disposed
of according to recycling laws.
The improper use of this projector, cancel the guarantee and our responsibility. All the information have been written and driven
with extreme care; however, we do not engage us any responsibility for contingent errors or omissions. We reserve the right to
modify and/ or improve our product as we retain necessary, without subsequent warning or notice. It is forbidden any complete
or partial reproduction of this handbook, if not expressly authorized.