Lampo HYPERCOLOR 575 User Manual - page 13
12
OPTIONAL AND BEAM ANGLE
BARN DOORS KIT
The barn doors mounting kit is supplied if requested as a optional, the
mounting process is very easy:
1- Unscrew the 4 PH screws from the front panel.
2- Insert the 4 spacers you will find in the barn door kit and firmly tight.
3- Position the barn doors and reposition the 4 PH screws of the front
panel without thigh them
4- Once in the correct position, tight firmly.
SPOT ADAPTER
The spot adapter it is mountable on HYPERCOLOR 575.
This system enable the projector to perform a beam like a standard
theatrical PC Spot: Loosing a bit the knob on top of the adapter and
moving the lens from front to back enable to project a variable aperture
beam from 10° up to 25° aperture.
The SPOT ADAPTER is supplied, under request as an optional and it is
mounting process is exactly the same as per the BARNDOORS.
Adjust the beam loosing and reblocking the knob on top of the adapter to
obtain the desired aperture.