Landice Cardio Owner's Manual - Self Diagnostics
The Cardio Treadmill is equipped with onboard self-diagnostics. If the treadmill experiences any errors during
operation, the treadmill will display the error message. You can run a self-diagnostics to get further information on the error.
(See below).
When you choose the option to enter diagnostics you will be prompted with a warning screen (shown below). After reading it,
straddle the treadmill by stepping on the traction strips on the sides of the running surface and press
ENTER.
The treadmill will systematically test all of the individual components of the treadmill. During some of the tests, you will be
prompted with simple “Yes or No” questions to assist with the diagnosis. Answer the questions using the LEFT ARROW for
NO and the RIGHT ARROW for YES when prompted (see picture below).
Once the Self-Diagnostics has completed all of the tests, it will read one of the two messages along the bottom: “No Errors
Detected”, or “Error Detected, Contact Service Provider”. Go to www.landice.com and click on Service Locator to find a
provider in your area.
To manually enter self-diagnostics mode, with the treadmill off, press the center
arrows
and
START at the same time.
Self Diagnostics
27