Landice Cardio Owner's Manual - Cardio Treadmill
CARDIO TREADMILL
Quick User’s Guide
To start the treadmill:
Press
START to power up treadmill. All displays will light and the treadbelt will begin to
move at 0.5 mph (0.8 km/h in metric mode).
To turn off the treadmill:
Pressing
STOP twice stops the treadbelt from moving. The treadmill will shut off and all
current statistical information will be cleared.
To change speed:
Hold
SPEED “+” key down to increase speed. Depressing speed “+” key for longer than
2 seconds causes the speed to increase at a faster rate. Release the button when display
indicates desired speed.
Hold
SPEED “-” key down to decrease speed. Depressing speed “-” key for longer than
2 seconds causes the speed to decrease at a faster rate. Release the button when display
indicates desired speed.
To change incline:
Hold
INCLINE “+” key down to increase elevation. Depressing incline “+” key for longer
than 2 seconds causes the incline to increase at a faster rate. Release the button when
display indicates desired incline.
Hold
INCLINE “-” key down to decrease elevation. Depressing incline “-” key for longer
than 2 seconds causes the incline to decrease at a faster rate. Release the button when
display indicates desired incline.
To view different display screens during your workout:
Press
ENTER or ARROWS at any time to choose the display screen that best suits your
workout.
Before you start the treadmill:
The Red Safety Key must be magnetically connected to the front of the display panel. During operation, removing
the SAFETY KEY will cause the treadmill to stop until it’s replaced.